digsy®CGC is a
new generation of automation systems for mobile applications.
Control and visualization are integrated in a single unit based
on the CAN-BUS with CANopen-protocol.
Compact unit with integrated functional units for
decentralized automation
Functionalities of a programmable logical controller
Program memory
Graphics and text memories
RS-232 and RS-485 serial interfaces
CAN-BUS
PDA (Production data acquisition)
Service data acquisition
Direct connection of cockpit switching elements (up to 64
keys)
Direct connection of joysticks (2 with 4 directions each)
Diagnostic functions
Inputs
8 x inputs digital 12 / 24 V with selectable logic levels
(current sourcing/current sinking)
8 x inputs digital 12 / 24 V as keymatrix, suitable for
connection of up to 64 keys
4 x inputs analog 0 up to 10 V; resolution:10 bits
1 x high-speed counter input up to 60 kHz
Outputs
8 x outputs digital 12 / 24 V 1,5 A, short circuit-proof,
overload proof, can be read back as a keyboard matrix
8 x outputs digital 12/24 V
4 x reference-voltage for analog inputs
Interfaces
1 x RS 232 (suitable for connection of a serial printer)
1 x RS 232 / RS 485
1 x CAN-BUS-connection (CANin and CANout) (2 x 9 pin sub-D
connectors)
1 x Manual rotary transducer interface with dedicated
power supply 5 V / 50 mA
1 x PC-card (optionally via RS 485)
As an integrated system, the CGC is more cost-effective
than individual units
Programmable logic controller with data storage and
graphical display
Field-programmable logic control
Language independent driver information through icons
Direct connection of the dashboard buttons and switches
without a cable harness
